Contec Abpm 50 Driver

Contec abpm-50 ambulatory blood pressure monitor, continuous monitorring, wireless bluetooth $279.00 4.5 feet long, ( 1.5 meet long ) NIBP, blood pressure extension hose, For Contec ABPM-50, PM-50 Monitor $25.00.

Introduction ABPM50 is a handhold ambulatory blood pressure monitor, which is designed according to oscillography theory. The device could monitor human body blood pressure up to 24 hours continuously and dynamically, providing accurate basis for the diagnosis. It is applicable for using in hospital, clinic and other medical institutions.

Main Features 1)Compact and portable, user-friend interface, easy to use 2)Patient range: adult, pediatric, neonate 3)24 hours ambulatory NIBP monitoring function, up to 350 groups of ambulatory NIBP data can be recorded for once. 4)Perfect combination of automatic and manual measurement method, up to 300 groups of data can be recorded for once by manual measure. 5)High-definition color TFT display, strong visibility 6)By data review interface such as 'data list','trend graph','big font', NIBP data is clear at a glance 7)Display of low power prompt, alarm, error message and time 8)Supply two kinds of unit: mmHg / kPa 9)Display interface can be switched between Chinese and English 10)Parameter alarm dispose function is optional 11)Communicate with PC, PC software can achieve data review, measured results analysis, view of trend graph, reports printing and other functions Software features: 1）Connect to the device by USB interface. 2）Download NIBP measure result from the terminal device. 3）Display of scoop-shape trend graph, filling-type trend graph, histogram, pie chart, correlation line graph. 4）Edit every piece of NIBP data, and add annotation to it.

5）Edit basic information, doctor's advice, NIBP status instruction, current medicine-taken information, etc. 6）Support report printing and print preview.

• • Ambulatory blood pressure monitoring: Caution Prolonged non-invasive blood pressure measurements in Auto mode may be associated with purport, ischemia and neuropathy in the limb wearing the cuff. When monitoring a patient, examine the extremities of the limb frequently for normal color, warmth and sensitivity. If any abnormality is observed, stop the blood pressure measurements.

• You must not perform NIBP measurements on patients with sickle-cell disease or under any condition which the skin is damaged or expected to be damaged. • For a thrombasthenia patient, it is important to determine whether measurement of the blood pressure shall be done automatically. The determination should be based on clinical evaluation. • Do not apply the cuff to a limb that has an intravenous infusion or catheter in place. This could cause tissue damage around the catheter when infusion is slowed or blocked during cuff inflation.

Reinstall software Follow the steps below to remove the program prior to running the setup program again. • Uninstall the ABPM50 program from 'Add & Remove Program,' which can be found in control panel. As an alternative, go to Start >> All Programs >> ABPM50 Monitor >> Uninstall ABPM50 Monitor to remove the program.

The features ensure user’s will quickly learn the programming fundamentals needed to begin producing successful results. Engraving machine software download. Software for Laser Marking, Engraving & Cutting A state-of-the-art laser engraving system requires the best laser engraving software available, LaserStar's laser engraving software is that software.

• Connect the device to the computer via the USB port. • Right click on Computer, select Manager >> Device Manager. • Look for CD Class example (under Other devices) or STM32 Virtual COM port Device (under Ports). If found, double click on the entry and select Driver tab and Uninstall. Run the ABPM50_Setup.

A version of the program can be found in the above. Install driver (Manual) If the installed software cannot find the ABPM50, the device driver may not be installed properly. To check for this possibility, plug in the ABPM50 in the computer USB port and make sure that it is turned on. Right click on 'Computer' and select 'Manage' > 'Device Manager'. If 'STM32 Virtual COM port Device (COMx)' appears (see left diagram below), the device driver is installed properly; if 'CD Class example' appears (see right diagram below), Windows finds the device but not the driver; if no extra entry is found, Windows cannot find the device.